Table of Contents
Advertisement
DEVELOPER INSTALLATION
Sim 25-02
Auto Developer Adjustment
Select CMYK
Note: Toner Installation should be performed after
Auto Developer Adjustment is completed
For Optimum Image Quality it is recommended to
install developer at the customer site
Sim 26-06
Machine Destination Set
Sim 26-52
Blank Paper Count Mode Setting (Non Print)
Sim 26-65
Finisher Alarm mode
Select
Sim 26-01
Right Tray Installation
Sim 26-35
Set Multi Error Counter
Sim 26-78
Remote Desktop Access Password set.
CASSETTE SETUP & PAPER TYPE
Set cassette size by adjusting the guides in the cassette.
Paper Size & Type Setting:- System Settings – Paper Tray Settings
IMAGE WRITING DISTORTION – CMYK
SIM 50-22
Image Writing Adjustment
PRINT IMAGE MAGNIFICATION & OFF CENTRE
Automatic Adjustment:
Sim 50-28
BK MAG ADJUST (Magnification)
SETUP/PRINT ADJ (Offset)
Normally no need to adjust as set in factory
Initial Set-up
INITIAL SETTINGS
Staple sheet limit (30 or 50)
Staple copies/sets limit (ON/OFF)
Yes/No.
Set to 1 (Multi Count).
10
Document Solutions After Sales Service
Hide quick links:
Advertisement
Table of Contents
