SHARP
DEVELOPER SETUP:
Sim 25-02
Clean LSU Dust Proof Glass.
TONER INSTALLATION & REPLENISHMENT:
Install CMYK Toner Cartridges:
PRODUCT ACTIVATION & FIRMWARE UPGRADE:
Activation of Optional Products:
Sim 22-05
INITIAL SETUP:
Sim 26-01
Sim 26-02
Sim 26-06
Sim 26-35
Sim 26-50
Sim 26-52
Sim 55-03
Sim 55-03
Toner Remaining Status Display [Home Screen]:
Adjust Date/Time (Inc. Daylight Saving setting):
Keyboard Language Setting:
Paper Size & Type Settings:
Auto Developer Adjustment - Select CMYK.
*1 set of CMYK Developer is provided with each machine*.
ALL TONER CARTRIDGES must be removed before executing Automatic
Developer Adjustment.
For optimum image quality and performance, it is recommended to setup
and install Developer at the customer site (environment).
Caution:
DO NOT open any Exterior Cover, Power OFF/ON or enter Simulation
Mode during Initial Toner Replenishment.
System Settings – Common Settings – Product Key.
Check Firmware Version(s):
Right Exit Tray Installation: Yes/No.
LCC Installation (Paper Size): A4/Letter.
Machine Destination check.
Set Multi Error Counter: Set to 1 (Multi Count).
Long Paper Support (up to 1200mm): 0 = Disable, 1 = Enable.
Non Printed Paper Counter Set-up.
Process Mixed Size Pages (orientation) when Printing in Duplex:
SSW 3-6, 0 = Disable, 1 = Enable.
PDF/PS Preview Thumbnail for Direct Print Function:
SSW 35-1, 0 = Disable, 1 = Enable.
System Settings – Home Screen Settings – Display Toner Quantity (enable)
System Settings – Common Settings – Clock Adjust.
System Settings – Common Settings – Default Keyboard Setting.
System Settings – Common Settings – Paper Tray Settings.
Set cassette size by adjusting the guides in the cassette.
Upgrade to latest version.
INITIAL SETUP
11