Show Lacp; Show Lacp Sys-Id - TP-Link T1600-28TS Cli Reference Manual

7.7 show lacp

Description
The show lacp command is used to display the LACP information for a
specified EtherChannel Group.
Syntax
show lacp [
Parameter
channel-group-num
6. By default, it is empty, and will display the information of all LACP groups.
internal —— The internal LACP information.
neighbor —— The neighbor LACP information.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the internal LACP information of EtherChannel Group 1:
T1600G-52TS(config)# show lacp 1 internal

7.8 show lacp sys-id

Description
The show lacp sys-id command is used to display the LACP system priority
globally.
Syntax
show lacp sys-id
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
channel-group-num
] { internal
—— The EtherChannel Group number, ranging from 1 to
47
|
neighbor }