Mount The Ac Battery On The Wall - enphase AC Battery Installation Manual

5. Mount the AC Battery on the Wall

WARNING: Risk of injury and equipment damage. You must mount the AC Battery to a
suitable wall.
WARNING: Risk of injury and equipment damage. Avoid dropping the AC Battery. Doing so
may create a hazard, cause serious injury, and/or damage the equipment.
WARNING: Before mounting the Enphase AC Battery, ensure that the junction box cover is
secured!
WARNING: Take care when lifting the AC Battery. The AC Battery is heavy and may require
two persons to lift.
a. Using both hands, take the AC Battery from the packaging and place it right side up on a flat surface.
Be sure that the AC connector is not pinched underneath.
NOTE: Never leave the battery on its back for more than five minutes. The battery cells are
meant to be in the upright position.
b. Begin by installing the AC Battery located closest to the main supply. Using the two grip insets on the
side of the AC Battery, lift and carry the AC Battery to the installed wall-mount bracket.
c. While setting the AC Battery onto the wall-mount bracket, ensure that the four tabs on the AC Battery
are inserted into their corresponding openings in the wall-mount bracket. After the tabs are inserted,
begin lowering the AC Battery slowly to ensure that the tabs have latched onto the wall-mount
bracket.
WARNING: Risk of injury and equipment damage. Do not release the AC Battery until you
ensure that all four tabs have safely latched onto the wall-mount bracket.
14
Bottom view (access panel removed)
© 2016 Enphase Energy Inc.
AC Battery Installation
141-00036 Rev 01