How To Set Up The Camera For Daily Cleaning Of The Visual Window - Axis Q8741-E User Manual

AXIS Q87 Bispectral PTZ Network Camera Series
Setup
6. Create the zoomed-in preset position (call it for instance "gate position") so that it covers the area in the image where you
predict that the moving object will appear.
Create the VMD event:
7. Go to Settings > System > Events and add an action rule.
8. Name the action rule Gatekeeper.
9. Set the trigger to:
- Applications
- VMD 4: gate profile (Thermal)
10. Set the action to:
- Type: PTZ Control
- Control: Preset Position
- Go to: gate position
11. Select Return to home position when rule is no longer active.
12. Set the duration for the camera to stay in the gate position (wait at least 30 seconds before returning to home position).
13. Click OK.
Create the recording event:
14. Create an Action Rule and call it for example "record video".
15. Set the trigger to:
- PTZ
- Preset Reached
- Visual
- gate position
16. Set the action to:
- Type: Record Video
- Select video source: Visual
- Duration: While the rule is active
- Storage: SD Card
17. Click Ok.

How to set up the camera for daily cleaning of the visual window

The camera is often installed in inaccessible locations. This example explains how you can use the built-in wiper and optional washer
to remove for instance sea salt, from the visual window without physically accessing it.
Configure the washer:
1. Point the camera at the nozzle making sure that the nozzle is located in the center of the image.
2. Go to Settings > System > Accessories.
8