Troubleshooting; Reset To Factory Default Settings - Axis Q8741-E User Manual

Q87 bispectral series ptz network camera

Hide thumbs Also See for Q8741-E:

Table of Contents

AXIS Q87 Bispectral PTZ Network Camera Series

Troubleshooting

CAUTION

Risk of injury. Moving parts. Keep your body parts away from the product when in operation. Disconnect from power

supply before installing or performing maintenance on the product.

CAUTION

Risk of injury. Hot surface. Do not touch the product when in operation. Disconnect from power supply and allow the

surfaces to cool before performing maintenance on the product.

NOTICE

TICE

Removing the top cover exposes parts of the visual camera that are sensitive to impact. Avoid hitting the unprotected camera

with the top cover at disassembly.

Important

Reset to factory default should be used with caution. A reset to factory default will reset all settings, including the IP

address, to the factory default values.

Note

The installation and management software tools are available from the support pages on www.axis.com/support/downloads

To reset the product to the factory default settings:

1. Disconnect power from the product.

2. Unscrew the four top cover screws and remove the top cover.

3. Change the position of the Factory default switch.

Table of Contents

Axis q8742-e