Cleaning Recommendations; Set Up Daily Cleaning Of The Visual Window - Axis Q8752-E User Manual

AXIS Q8752-E Bispectral PTZ Network Camera

Cleaning recommendations

Cleaning recommendations

Set up daily cleaning of the visual window

The camera is often installed in inaccessible locations. This example explains how you can set up the built-in wiper and optional
washer to remove for instance sea salt, from the visual window daily without physically accessing it.
Configure the washer:
1. Point the camera at the nozzle. Make sure that the nozzle is located in the center of the image.
2. Go to Settings > System > Accessories.
3. Turn on Nozzle Position.
4. Select the washer pump pin that the washer is connected to.
Set up daily cleaning:
1. Go to Settings > System > Events > Schedules and add a new schedule.
2. Select Schedule and click Create.
3. Give the schedule a name, for example Wash.
4. Under Repeat, select Daily.
5. Set Start time: 12:00 and End time: 12:01.
6. Select all Days.
7. Click Save.
8. Click Rules and create a new rule.
9. Give the rule a name, for example Window wash.
10. In the list of conditions, under Scheduled and recurring, select Scheduled event.
11. In the list of schedules, select Wash
12. In the list of actions, under Washer, select Use washer.
15