Configuring Automatic Certificate Request; Manually Requesting A Certificate - HPE FlexNetwork 7500 Series Security Configuration Manual

Configuring automatic certificate request

IMPORTANT:
The device does not support automatic certificate rollover. To avoid service interruptions, you must
manually submit a certificate renewal request before the current certificate expires.
In auto request mode, when an application works with a PKI entity that does not have a local
certificate, the entity automatically submits a certificate request to the CA. After obtaining the
certificate from the CA, the PKI entity saves the certificate at the local in the PKI domain.
A CA certificate must be present before you request a local certificate. If no CA certificate exists in the
PKI domain, the PKI entity automatically obtains a CA certificate before sending a certificate request.
To configure automatic certificate request:
Step
1. Enter system view.
2. Enter PKI domain view.
3. Set the certificate request
mode to auto.

Manually requesting a certificate

Before you manually submit a certificate request, make sure the CA certificate exists and a key pair
is specified for the PKI domain:
•
The CA certificate is used to verify the authenticity and validity of the obtained local certificate.
•
The key pair is used for certificate request. Upon receiving the public key and the identity
information, the CA signs and issues a certificate.
After the CA issues the certificate, the device obtains and saves it locally.
To manually request a certificate:
Step
1. Enter system view.
2. Enter PKI domain view.
3. Set the certificate
request mode to
manual.
4. Return to system view.
5. Obtain a CA certificate.
6. Submit a certificate
request or generate a
certificate request in
PKCS#10 format.
Command
system-view
pki domain domain-name
certificate request mode auto
[ password { cipher | simple }
password ]
Command
system-view
pki domain domain-name
certificate request mode manual
quit
See "Obtaining certificates."
pki request-certificate domain
domain-name [ password password ]
[ pkcs10 [ filename filename ] ]
247
Remarks
N/A
N/A
By default, the manual
request mode applies.
In auto request mode, set
a password for certificate
revocation as required by
the CA policy.
Remarks
N/A
N/A
By default, the manual request
mode applies.
N/A
N/A
This command is not saved in
the configuration file.
This command triggers the PKI
entity to automatically generate
a key pair if the key pair
specified in the PKI domain
does not exist. The name,