HPE FlexNetwork 7500 Series Security Configuration Manual page 142

# Enable MAC authentication on GigabitEthernet 1/0/1.
[Device] interface gigabitethernet 1/0/1
[Device-GigabitEthernet1/0/1] mac-authentication
[Device-GigabitEthernet1/0/1] quit
# Specify the MAC authentication domain as the ISP domain bbb.
[Device] mac-authentication domain bbb
# Set MAC authentication timers.
[Device] mac-authentication timer offline-detect 180
[Device] mac-authentication timer quiet 180
# Specify username aaa and password 123456 in plain text for the account shared by MAC
authentication users.
[Device] mac-authentication user-name-format fixed account aaa password simple 123456
# Enable MAC authentication globally.
[Device] mac-authentication
Verifying the configuration
# Verify the MAC authentication configuration.
[Device] display mac-authentication
Global MAC authentication parameters:
MAC authentication
User name format
Offline detect period
Quiet period
Server timeout
Authentication domain
Max MAC-auth users
Online MAC-auth users
Silent MAC users:
MAC address
GigabitEthernet1/0/1
MAC authentication
Carry User-IP
Authentication domain
Auth-delay timer
Re-auth server-unreachable : Logoff
Guest VLAN
Guest VLAN auth-period
Critical VLAN
Critical voice VLAN
Host mode
Offline detection
Authentication order
Max online users
Authentication attempts
Current online users
: Enabled
: Fixed account
Username : aaa
Password : ******
: 180 s
: 180 s
: 100 s
: bbb
: 4294967295 per slot
: 1
VLAN ID
is link-up
From port
: Enabled
: Disabled
: Not configured
: Disabled
: Not configured
: 30 s
: Not configured
: Disabled
: Single VLAN
: Enabled
: Default
: 4294967295
: successful 1, failed 0
: 0
130
Port index