HPE FlexNetwork 7500 Series Security Configuration Manual page 221

Port mode
NeedToKnow mode
Intrusion protection mode
Security MAC address attribute
Learning mode
Aging type
Max secure MAC addresses
Current secure MAC addresses
Authorization
# After users pass authentication, display MAC authentication information. Verify that port
GigabitEthernet 1/0/1 allows multiple MAC authentication users to be authenticated.
[Device] display mac-authentication interface gigabitethernet 1/0/1
Global MAC authentication parameters:
MAC authentication
Username format
Username
Password
Offline detect period
Quiet period
Server timeout
Authentication domain
Max MAC-auth users
Online MAC-auth users
Silent MAC users:
MAC address
GigabitEthernet1/0/1 is link-up
MAC authentication
Authentication domain
Auth-delay timer
Re-auth server-unreachable : Logoff
Guest VLAN
Guest VLAN auth-period
Critical VLAN
Critical voice VLAN
Host mode
Offline detection
Authentication order
Max online users
Authentication attempts
Current online users
MAC address
1234-0300-0011
1234-0300-0012
1234-0300-0013
# Display 802.1X authentication information. Verify that GigabitEthernet 1/0/1 allows only one
802.1X user to be authenticated.
: macAddressElseUserLoginSecure
: NeedToKnowOnly
: NoAction
: Sticky
: Periodical
: 64
: 0
: Permitted
: Enabled
: MAC address in uppercase(XX-XX-XX-XX-XX-XX)
: mac
: Not configured
: 300 s
: 180 s
: 100 s
: sun
: 4294967295 per slot
: 3
VLAN ID From port
: Enabled
: Not configured
: Disabled
: Not configured
: 30 s
: Not configured
: Disabled
: Single VLAN
: Enabled
: Default
: 4294967295
: successful 3, failed 7
: 3
Auth state
Authenticated
Authenticated
Authenticated
209
Port index