Configuring A Local Portal Web Server; Enabling Portal Roaming - HPE FlexNetwork 7500 Series Security Configuration Manual
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (597 pages) ,
- Command reference manual (474 pages) ,
- Network management and monitoring command reference (430 pages)
Table of Contents
Advertisement
</head>
<body onload="pt_init();" onbeforeunload="return pt_unload();">
... ...
</body>
</html>
Configuring a local portal Web server
Perform the following tasks for the local portal Web server to support HTTPS:
•
Configure a PKI policy, obtain the CA certificate, and request a local certificate. For more
information, see
•
Configure an SSL server policy, and specify the PKI domain configured in the PKI policy. For
more information, see
To configure a local portal Web server:
Step
1.
Enter system view.
2.
Create a local portal Web
server and enter its view.
3.
Specify the default
authentication page file for
the local portal Web server.
4.
(Optional.) Configure the
listening TCP port for the
local portal Web server.
Enabling portal roaming
Portal roaming takes effect only on portal users logging in from VLAN interfaces. It does not take
effect on portal users logging in from common Layer 3 interface.
If portal roaming is enabled on a VLAN interface, an online portal user can access resources from
any Layer 2 port in the VLAN without re-authentication.
If portal roaming is disabled, to access external network resources from a Layer 2 port different from
the current access port in the VLAN, the user must do the following:
•
First log out from the current port.
•
Then re-authenticate on the new Layer 2 port.
To enable portal roaming:
Step
1.
Enter system view.
2.
Enable portal
roaming.
"Configuring
PKI."
"Configuring
SSL."
Command
system-view
portal local-web-server { http |
https ssl-server-policy
policy-name [ tcp-port
port-number ] }
default-logon-page filename
tcp-port port-number
Command
system-view
portal roaming enable
155
Remarks
N/A
By default, no local portal Web
servers exist.
By default, no default
authentication page file is
specified for the local portal Web
server.
By default, the HTTP service
listening port number is 80 and the
HTTPS service listening port
number is 443.
Remarks
N/A
By default, portal roaming is
disabled.
You cannot enable portal roaming
when login users exist on the
Advertisement
Table of Contents
Troubleshooting
