HPE FlexNetwork 7500 Series Security Configuration Manual page 218

[Device] port-security oui index 5 mac-address 1234-0500-1111
# Set the port security mode to userLoginWithOUI.
[Device] interface gigabitethernet 1/0/1
[Device-GigabitEthernet1/0/1] port-security port-mode userlogin-withoui
[Device-GigabitEthernet1/0/1] quit
Verifying the configuration
# Verify the RADIUS scheme configuration.
[Device] display radius scheme radsun
RADIUS Scheme Name
Index : 0
Primary Auth Server:
Host name: Not configured
IP : 192.168.1.2
State: Active
VPN : Not configured
Primary Acct Server:
Host name: Not configured
IP : 192.168.1.3
State: Active
VPN : Not configured
Second Auth Server:
Host name: Not configured
IP : 192.168.1.3
State: Active
VPN : Not configured
Second Acct Server:
Host name: Not configured
IP : 192.168.1.2
State: Active
VPN : Not configured
Accounting-On function
retransmission times
retransmission interval(seconds)
Timeout Interval(seconds)
Retransmission Times
Retransmission Times for Accounting Update : 5
Server Quiet Period(minutes)
Realtime Accounting Interval(minutes)
NAS IP Address
VPN
User Name Format
Data flow unit
Packet unit
Attribute 15 check-mode
# After users pass authentication, display port security configuration. Verify that port GigabitEthernet
1/0/1 allows only one 802.1X user to be authenticated.
[Device] display port-security interface gigabitethernet 1/0/1
: radsun
206
Port: 1812
Port: 1813
Port: 1812
Port: 1813
: Disabled
: 50
: 3
: 5
: 5
: 5
: 15
: Not configured
: Not configured
: without-domain
: Million Byte
: one
: Strict