HPE FlexNetwork 7500 Series Security Configuration Manual page 200

Authentication domain: Not configured
Pre-auth domain: Not configured
User-dhcp-only: Disabled
Pre-auth IP pool: Not configured
Max Portal users: Not configured
Bas-ip: Not configured
User Detection:
Action for server detection:
Server type
--
Layer3 source network:
IP address
Destination authenticate subnet:
IP address
IPv6:
Portal status: Disabled
Authentication type: Disabled
Portal web server: Not configured
Authentication domain: Not configured
Pre-auth domain: Not configured
User-dhcp-only: Disabled
Pre-auth IP pool: Not configured
Max Portal users: Not configured
Bas-ipv6: Not configured
User detection: Not configured
Action for server detection:
Server type
--
Layer3 source network:
IP address
Destination authenticate subnet:
IP address
A user can perform portal authentication through a Web page. Before passing the authentication, the
user can access only the authentication page http://2.2.2.1:2331/portal and all Web requests will be
redirected to the authentication page. After passing the authentication, the user can access other
network resources.
# After the user passes authentication, use the following command to display information about the
portal user.
[Switch] display portal user interface gigabitethernet 1/0/2
Total portal users: 1
Username: abc
Portal server: newpt
State: Online
VPN instance: --
MAC
0015-e9a6-7cfe
Authorization information:
Not configured
Server name
--
Mask
Mask
Server name
--
IP
2.2.2.2
188
VLAN Interface
-- GigabitEthernet1/0/2
Action
--
Action
--
Prefix length
Prefix length