Table of Contents
Advertisement
1
Brief Introduction
1.1 Preface
This manual will provide the users who use the Growatt SPH Series of GROWATT NEW
ENERGY TECHNOLOGY CO.LTD.SHENZHEN(Short for Growatt New Energy as below)
with the detailed product information and the installation instructions. Please read
this manual carefully and put this manual on some place where is convenient to
installation, operation, obtain. Any modifications of Growatt new energy, we will not
notify the user.
1.2 Target Group
Growatt SPH inverter must be installed by professional electrical personnel who have
obtained the certification of the relevant departments. We have two kinds of energy
storage machine for different battery one is for lithium battery and the other is for
lead-acid battery, we suggest: customer should decide which kind of energy storage
machine you want, Growatt can provide only lithium battery with energy storage
machine, customer can choose lead-acid energy storage machine with no battery
provide by Growatt while they can buy these battery from market easily. Especially if
customer choose energy storage system with lithium battery(which must be provide
by Growatt) but used for lead-acid battery or used lead-acid battery for lithium
battery model, it will be dangerous. Installer can install energy storage machine of
Growatt SPH Series rapidly and troubleshooting, build communication system
through read this manual carefully. If you have any questions in the process of
installation, you can login in
www.growatt.com
call our 24-hour service hotline +86 0755 2747 1942/400-931-3122.
1.3 Product Description
Growatt SPH Series is used to store energy generated by the photovoltaic cell panels
or energy from grid if it is allowed in the battery, also energy can be sent to power
grid through SPH for self consumption or when Grid power is lost, SPH can be used as
back up power.
SPH series has six kinds of type:
•Growatt SPH3000
•Growatt
SPH3600
•Growatt SPH4000
•Growatt SPH4600
•Growatt SPH5000
•Growatt SPH5600
Note: we describe this series as "SPH" as below.
Note: In different country,we provide different power.Such as in Germany,we can
provide SPH3000~SPH4600,but we don't provide SPH5000 and SPH6000.
1
and leave some message. Or you can
Overview:
Chart 1.1
Description
Position
A
LED of status display
B
LCD screen
C
Function button
D
Battery terminal
E
NTC:Lead-acid temperature sensor terminal
F
RJ45 interface of DRMs(used only in Australia)
G
CT/meter input terminal
H
RS485 communication interface of Lithium battery
I
DIP switch(set safety standard)
J
USB interface
K
RS232/Wi-Fi cover board
L
Ground point
M
AC Grid (on grid connection)
N
RSD(do not open except by Professional staff)
O
EPS output(off grid connection)
P
PV input
Q
PV switch
2
Hide quick links:
Advertisement
Table of Contents
