the back panel of the Router or on the Device Information page in the web-based configuration
tool.
Connection Type
Select the connection type from the list. Four options are available.
•
Cable Modem
•
DSL (Static)
•
DSL (PPPoE)
•
PPTP
Cable Modem Settings
No additional settings are required. Make sure that the settings listed are correct.
DSL Static IP Settings
In the fields provided, type the IP address, IP subnet mask, ISP gateway address, and Domain
Name Server (DNS) IP address provided by your ISP.
DSL PPPoE Settings
Point to Point Protocol over Ethernet (PPPoE) is a proposal specifying how a host
computer interacts with a broadband modem (for example, DSL, cable, or wireless) to access
the network. In many respects PPPoE is similar to the Dialup Networking approach. If you
have a DSL (PPPoE) Internet connection, enter the PPPoE user name and password provided
by your ISP.
PPTP Settings
The following settings should be provided to you by your ISP.
•
IP Address
•
Subnet Mask
•
Server IP Address
•
User Name
•
Password