Gemtek Systems R921212G User Manual page 37

Install the Control Utility
You can install the Control Utility on your computer when you step through the setup process
using the Setup Wizard.
1. Insert the Wireless Broadband Router Setup Wizard and User Guide CD into the CD
drive. Your CD should automatically launch the Setup Wizard program. If it does not,
complete the following steps to start the Wizard.
a. Click the Start button, and then click Run.
b. Type the following text in the Open: field:
X:\setup.exe
where X is the drive letter of your CD drive.
c. Click the OK button.
2. From the main menu, click the Installation button, and then click either the Setup
First Computer button or the Setup Additional Computers button.
3. Follow the on-screen instructions.
Back to Top
Uninstall the Control Utility
1. If the icon is displayed in the system tray in the lower right corner of the screen,
right-click the icon and click Exit.
2. Click the Start button.
3. Click Control Panel.
The Control Panel window appears.
4. Click the Add/Remove Programs icon.
5. Click to select the Control Utility from the program list and remove it as instructed.
Back to Top
Start the Control Utility