Gemtek Systems R921212G User Manual page 81

Configuring your router for Wireless Bridging:
1. Ensure Enable Wireless is checked.
2. Type your wireless network name in the Network name (SSID) field if you want to
change it from the default setting.
3. Ensure Advanced Options is deselected.
4. Enable Wireless Bridge.
5. Type the Wireless MAC address (fields) of the other Wireless Broadband Router(s)
that you want to bridge.
NOTE: To connect two bridges together, enter the MAC address of the bridge at the other
end. To connect three bridges together, enter the MAC addresses of the other two
bridges in the bridge acted as the multipoint center. The MAC address of the center
bridge is the only address that needs to be entered into the other bridges.
6. Click the Submit button.