Parental Control - Gemtek Systems R921212G User Manual

7. Click the Save & Restart button.
8. When your web browser returns to the main page of the Router, the device has
successfully restarted with the new settings.
9. Repeat the steps above for each Wireless Broadband router you want to bridge.
NOTE: Ensure all routers are set to same wireless settings. Also, all router(s) not directly
connected to Internet should be configured to Access Point mode.
Back to Top

Parental Control

IP filtering is a mechanism enabling a networking node to accept or deny certain types of IP
datagrams based on the IP address, port number, protocol type, and other criteria.
1. Click the Add button. A pop-up Parental Control Rule window will appear.
Parental Control