Gemtek Systems R921212G User Manual page 74

802.11g wireless broadband router
Table of Contents

Advertisement

The Dell TrueMobilie 2300 Wireless Broadband Router comes with an assigned IP address
and IP subnet mask. These settings apply only to the local network portion of the router. If you
are installing the unit on an existing network or simply want to change these values, make sure
the IP subnet mask is the same for all devices on your network. The network portion of the IP
address must also be the same for all devices on your network.
NOTE: Dell strongly suggests you do not change the IP address unless there is a specific
reason for doing so.
While you are changing the IP address, be aware of the following:
Changing the IP address of the Router also changes the IP address pool if the DHCP
server is enabled.
If you are using the Router with a cable modem or DSL line, you should assign a
private IP address. Private IP addresses are in one of three ranges:
10.0.0.1-10.254.254.254
172.16.0.1-172.31.254.254
192.168.0.1-192.168.254.254
You must use the new IP address to access the web-based configuration tool.
NOTE: You should only change the IP address or IP subnet mask if you are installing the
Router on an existing wired network and the DHCP server function for your Router
is disabled in the Advanced Settings. For more information, contact your network
administrator.
Advanced IP Settings

Advertisement

Table of Contents
loading

Related Products for Gemtek Systems R921212G

Table of Contents