Advertisement
INSTALLATION
The oven can be built into a standard 560mm housing unit, either when built under the
worktop or built in a tall housing unit (please see the picture on the following page).
In both cases ventilation provisions must be made; for this reason, there must be a gap
of 85-90mm at the back of the housing unit.
The fixing of the oven in the cabinet is made by 4 screws 'A' that are on the corners of
the oven door frame.
The housing, adjacent furniture and all materials used in installation must be able to
withstand a minimum temperature of 85°C plus ambient temperature during periods of
operation.
In addition, adjacent furniture cabinet doors must be at least 4mm from the appliance at
all points.
When placing the appliance in the housing unit, do not use the oven door as a lever for
lifting the oven.
Do not place heavy objects on or lean on the oven door when open, as this can cause
damage for the hinges.
Voltage regulations: 220-240V~ 50Hz
5
Advertisement
