Cygnus MR400 User Manual page 70

Cygnus MR400 Taximeter User Guide
TOTALS -
JAN
JOUR
JUL
JUN
KM/H
LOAD
LOG ON
MAR
MAX
MAY
MED
ML/H
MON
NEXT
NO TRF
NOV
OCT
OFF
ON
P/KM
P/M
PAID
PAYMENT LAMP
PIN
PLEASE SET DATE
AND TIME -
"CLOCK SET" PIN
REQUIRED -
PLEASE SET THE
PIN NOW
PLEASE USE PIN
TO LOG ON
PLEASEWAIT
PRESS SELECT TO
CLEAR THE
TEMPORARY
TOTALS
PRESS SELECT TO
SET THE USER
68
January
"Journeys". (Totals).
July
June
Kilometres per Hour. (Speedometer, speed alarms)
Software "Load" date. This is the date when your
MR400's software was programmed into it.
Prompt to Log On to the meter.
March
"Maximum" Speed (Totals)
May
Medium brightness setting.
Miles per Hour. (Speedometer, speed alarms)
Monday
Next Tariff Code (Deferred Tariffs)
"No Tariff". Shown when there is no tariff currently
installed.
November
October
Feature turned Off, or "disabled".
Feature turned On, or "enabled".
Pulses per Kilometre. (Calibration)
Pulses per Mile. (Calibration)
Paid Distance. (Totals).
Prompt for user to set the Payment Lamp option.
PIN Number
Scrolling message when meter is first powered up.
This means that the internal rechargeable battery
has probably discharged and the clock needs to be
set. Enter the "Clock Set PIN" and set the time and
date.
Prompt for setting the User PIN.
An attempt has been made to enter HIRED mode
when the Log ON with PIN system is in use, and
there is no user logged on.
Message displayed during a "Totals
Reorganisation".
Confirmation message before clearing the
temporary totals. This gives you the chance to
change your mind by pressing "REVERT".
Prompt to set the Disable User PIN.
6.4
5.7.3,5.7.4
5.6
5.3
6.4
5.5.1
5.7.3,5.7.4
5.6.2
5.7.1
5.7.1
6.4
5.7.6
2.3
5.5.5
5.3,5.8.1,7.2
6.9
6.78
5.5.4