Entering A Pin; Setting A New Pin - Cygnus MR400 User Manual

Cygnus MR400 Taximeter User Guide

4.4 Entering a PIN

At various points, your MR400 will need you to enter a PIN Number. This is
how it is done:
The dashes change
to stars as you enter
the PIN number.
1
Figure 9: Entering a PIN Number
If you do not press a button for 20 seconds, the MR400 times out and goes
back to its previous state.

4.5 Setting a New PIN

Whenever you need to set a new PIN Number, the MR400 always gets you to
enter it twice to make sure that you have not made any typing errors.
If you enter a different number the second time, you will have to start the
whole operation again.
16
2 3 4 5
Use the buttons as if
they were numbered 1
to 5 from left to right.