For Hire" Mode - For When The Taxi Is For Hire - Cygnus MR400 User Manual

2.5 "FOR HIRE" Mode – For when the taxi is for hire
From "On" or "Off", press "MODE" to get into "FOR HIRE".
The MR400 may display warning messages in this mode, a clock display, or
text programmed as part of your tariff.
The charging
rate selected.
Press "SELECT" to choose
the rate to charge. The
MR400 may only allow some
of the available rates to be
selected if your tariff is
"Calendar Controlled". It
may not allow any manual
rate selection at all.
Figure 4: For Hire Mode
f Your taxi's "TAXI" roof sign is driven by the MR400. In FOR HIRE
mode, it is normally turned ON. This depends, however, on how your
meter has been programmed.
© 2014 Cygnus Automotive Limited
The information in this part
of the display depends on
how your MR400 has been
programmed.
Press "REVERT"
to turn the MR400
off.
Press "MODE"
to go to
"HIRED" mode.
5