Siemens Gigaset 54 User Manual page 37

Gigaset USB Adapter 54 / English / A31008-E505-B104-1-19 / configuration.fm / 26.02.2004
The list shows the following parameters for each connection partner:
SSID
BSSID
Channel
Encryption
Signal
Turbo Mode
Transmission Mode Shows the connection partner's current Transmission mode
Network Mode
Establishing a connection
ì
Double-click in the list on the connection partner with which you want to set up a
connection.
This connects your PC to the connection partner.
i
Shows the connection partner's ID (see "SSID (Service Set
Identifier)" on page 23).
Shows the connection partner's physical address (Basic Service Set
Identifier).
In networks with Infrastructure mode, the BSSID corresponds to
the MAC address of the Access Point.
Shows the radio channel the connection partner uses to transmit
data (see "Channel" on page 25).
Shows whether radio traffic to the connection partner is encrypted
(see "Encryption" on page 29).
If this is the case, you will see a key icon.
Shows the signal strength of the radio traffic between your PC and
the connection partner as a percentage (see "Status" on page 33).
Shows whether the connection partner's Turbo mode has been
activated (see "Turbo Mode" on page 26).
(see "Transmission Mode" on page 25).
Shows the connection partner's current Network mode
(see "Network Mode" on page 24).
If your network adapter's active configuration profile is not compatible
with the connection partner's settings, you will first see the
Configuration – General tab.
ì
Change the settings required for the connection.
OR
ì
Select a saved profile.
Then the connection will be set up automatically.
Configuring the Gigaset USB Adapter 54
37