Setting Up The Bluetooth Receipt Printer - Moneris PAYD Pro Plus Hardware Install Manual

11. Pair the scanner with your Apple iPad:
a. Access the Apple iPad's Settings screen.
b. Ensure that your Apple iPad's Bluetooth menu is open, that
Bluetooth is enabled, and that the Apple iPad is configured to be
"discoverable" by another Bluetooth-ready device.
c. On your Apple iPad's Bluetooth menu, tap the scanner's name
(e.g., "Socket CHS") in the OTHER DEVICES list.
d. Wait while the tablet pairs with the scanner. When the scanner
appears in the MY DEVICES list and its status is showing as
"Connected", the scanner has been paired successfully.
e. Close out of the Settings screen and proceed to step 12.
12. Login to the PAYD Pro Plus App again (see Signing into the PAYD Pro Plus
App on page 3 for more information).
13. Tap the Settings button (
14. On the Settings menu, tap Configuration.
15. On the Configuration screen, tap Devices.
16. In the right pane of the Devices screen, the barcode scanner will be
automatically detected and the status will change from "Not connected"
to display the scanner's name e.g., "Socket CHS".
17. Tap <Configuration at the top of the right pane to save your work and
return to the Configuration screen.
The system will save the configuration.
The Bluetooth barcode scanner is ready to use with the PAYD Pro Plus App. If
you encounter any problems, refer to the Troubleshooting section on page 15.

Setting up the Bluetooth receipt printer

Use the Bluetooth receipt printer to print receipts when transactions are
completed. Follow the instructions below to set up the Bluetooth receipt
printer with your Apple iPad.
8 PAYD PRO PLUS® MOBILE SOLUTION: HARDWARE INSTALL GUIDE
).