Step 15 Secure The Product - SPORTS ART DF-208 Owner's Manual

STEP 15 Secure the Product
(a) Remove screws (66) from the floor fixing bracket (A18).
(b) Insert the U clip (A19) onto the machine (Make sure the U clip with the
correct side downward as below shown), and then secure the floor
fixing bracket (A18) with screws (66).
(c) Secure the floor fixing bracket to the floor with the floor fixing bolt, nut
and washer as shown to make sure the machine is firmly fixed to the
floor when operating.
(Note: The screw hole of floor fixing bracket is Ø9mm, please make sure
using the suitable floor fixing bolt and drilling the proper hole on the floor.)
(a)
(b)
35
(c)