SPORTS ART DF-208 Owner's Manual page 18

STEP 3 Weight Stack Installation (Continued)
(f) Insert and lower the (5 kg/11lb) weight plate (A33) into place on the
guide rods (55) one at a time. Once complete, slide down the upper
stack carriage set (52) on top of the weight stack.
(Note: The convex side of weight plate should face up and the stack fork
(A7) points toward the front.)
*If there is an optional (7.5kg/16.5lb) weight plate installed, insert the
optional weight plates before the (5 kg/11lb) weight plates (A30).
(g) Tilt the guide rods (55) back into place and then lift them up to their
mounting position, and then secure the assembly with screws (53) (54).
(f)
(g)
17