STEP 13
Covers Installation (Continued)
Follow instructions (a) through (c) to install the front and rear covers.
(a) Use screws (11) to secure the cover bracket (A9) in place on the main
frame (A3) as shown.
(b) Slide the rear cover (A14) and the front cover (A15) from the top down
into the cover support plates' grooves.
(Note: Take out the stack fork (A7) and place it on the upper stack
carriage set (52) as shown to avoid damaging to the cover.)
(c) Secure the front cover bracket (17) with screws (16) as shown.
(a)
(b)
(c)
32