Step 13 Level And Secure The Product - SPORTS ART DS972 Owner's Manual

STEP 13 Level and Secure the Product
Follow instructions (a) through (c) below to level and secure the unit.
(Note: Adjust the leveler nut at area D first, then area E.)
(a) Loosen the leveler nut and then rotate the leveler downward so it firmly
touches the floor.
(b) Once the machine is leveled, secure the leveler nut upward against the
product frame.
(c) Secure the floor fixing bracket (15) to the floor with the floor fixing bolt, nut
and washer as shown to make sure the machine is firmly fixed to the floor
when operating. (Note: Level the machine before securing the floor fixing
bolt.)
(Note: The screw hole of floor fixing bracket is Ø9mm, please make
sure using the suitable floor fixing bolt and drilling the proper hole on
the floor.)
Note: Secure the floor fixing brackets at area D only and make sure they are
secured in proper direction as shown.
(a)
(b)
(c)
E
D
D
23
E