The contents of the documentation pack may vary
depending
on
specific
requirements.
Selecting a Point-of-Sale Location
Do not locate the reader where it is exposed to the
following:
•
Devices that radiate excessive electrical noise or
voltage fluctuations, such as air conditioners, fans,
electric motors, neon signs, or high-frequency
security devices.
•
Water containers, such as a sink, a laundry tub or
a pool.
•
Areas of excessive moisture, heat, oil, dust or
debris.
•
Direct sunlight or objects that radiate heat.
•
Place the QX100 on a flat table or countertop close to the
POS terminal or ECR to which it is to be connected, in an
easily accessible place for the cardholder.
•
The contactless reader may also be mounted in a fixed
position. See "Mounting the Contactless Reader" for mounting
information.
•
Do not cover the QX100.
Overextending the interconnection cable may cause
damage to the contactless reader and to the device to
which it is connected.
6
Note
customer
documentation
Warning
Caution
Installation Manual
QX100