Table of Contents
Advertisement
Figure A-2 Positioning the Reader
Startup of the QX100
The QX100 starts up automatically when:
•
The reader is plugged into a terminal with a power source,
and the terminal is first powered-up.
•
The reader is first plugged into an electrical outlet.
To recognize the QX100 is powered-up:
1. The reader's lights being activated, blinking from left to
right, sequentially.
2. The lights are then followed by a short audio indication.
3. The LEDs go to their "ready for the next transaction" state.
LED Indicator Status
The LED indicator colors are credit card application
dependent.
For information
accepted and which application is being used, contact
your local VeriFone service provider.
There are two common color schemes for the LED indicators.
22
QX100
Note
on
what
cards are
Installation Manual
Advertisement
Table of Contents
