Table of Contents
Advertisement
QX100
2. General Safety Instructions
Failure to observe these instructions may result in
severe personal injury or damage to the QX100 or
other equipment.
These safety instructions are based in general on
those provided by Underwriters Laboratories (UL) Inc.
U.S.A.
When using the QX100 or any associated device, the following
basic safety precautions should always be observed to reduce
the risk of fire, electric shock or personal injury.
•
Read and make sure you understand all instructions.
•
Follow all warnings and instructions marked on the device
and in this manual.
•
Before cleaning, disconnect the device from the power
supply and any device to which the contactless reader is
connected.
•
Do not use liquid or aerosol cleaners. Use a damp cloth for
cleaning and/or a soft brush.
•
Never spill any liquid on the device.
•
Place the device in a stable position on a solid surface or
make sure that the reader is mounted properly. Serious
damage may result if the device falls.
•
Do not place objects on the interconnection cable. Install
the device where no one can step on the cable.
•
To reduce the risk of electric shock, do not disassemble any
of the equipment or accessories referred to in this manual.
If required, take the equipment to a qualified service
representative.
Incorrect
removing covers may expose you to dangerous voltages or
other risks.
•
Do not overload wall outlets and extension cords as this can
result in the risk of fire or electric shock.
Installation Manual
Warning
Note
reassembly
or
opening
or
3
Advertisement
Table of Contents
