Appendix A: Using The Contactless Reader; Positioning The Contactless Reader; Figure A-1 Pressing The Positioning Buttons - VeriFone QX100 Installation Manual

QX100
Appendix A: Using the
Contactless Reader
The card must be within 4 cm (1.57 in) of the landing
zone for the QX100 to read the card.

Positioning the Contactless Reader

The contactless reader can be moved to four positions:
• Laying flat
• 30°
• 60°
• 90°
To position your reader:
1. With your thumb and middle finger, press the buttons on
both sides of the reader.

Figure A-1 Pressing the Positioning Buttons

2. While holding down the positioning buttons, with your
other hand, hold the top of the reader, pushing or pulling to
the desired position.
Installation Manual
Note
21