Setup
Selecting Unit
Location
WARNING
Environmental
Factors
This chapter describes the setup procedure for the card reader and controller in
the following sections:
•
Selecting Unit Location
•
Unpacking the Shipping Carton
•
Examining the Unit's Features
•
Installing or Replacing SAM Cards
•
Cable Connections
•
Power Supply
•
Mounting the Device
•
Grounding the Reader
•
Service Switches
•
Using the Device
Use the following guidelines when selecting a location for your device.
•
Select a location convenient for the customer. For optimum performance of
the card entry slot, place the unit at a 30° angle.
•
Select a location near the device that will be connected to the reader/control
unit.
For safety, do not string cables or cords across a walkway.
The front panel of the device is dustproof and designed for any rainfall to run off of
it, as well as fade-proof from sun exposure, according to IP44 ratings.
UX300 M
C
R
ANUAL
ARD
EADER
C
2
HAPTER
11
I
G
NSTALLATION
UIDE