Fitting The Cabinet Doors - Miele KFN 37232 iD Operating And Installation Instructions

Building in the appliance

Fitting the cabinet doors

The cabinet door must be min.
5/8" (16 mm) or max. 3/4" (19 mm)
thick.
The following gap dimensions must be
maintained:
– The gap between the cabinet door
and the cupboard door above it must
be min. 1/8" (3 mm).
– The vertical gap between the cabinet
doors should be approx. 3 mm. The
exact value will depend on the radius
of the edge of the cabinet door.
If fitted in a run of units make sure that
the top edge of the cabinet door is at
the same height as neighboring unit
doors.
The appliance door must be under no
stress or burden while being fitted.
72
Fitted cabinet doors that exceed the
permissible weight can cause damage
to the hinges which can among other
things affect the functioning of the ap-
pliance!
An installation set or an extra pair of
securing brackets is available from
Miele Service or from specialist retail-
ers for the installation of large and di-
vided cabinet doors.
Complete the following steps on both
doors.
 The distance between the appliance
door and the mounting frame is set to
5/16" (8 mm). Check this distance
and adjust it if necessary.
 Push the installation aids  to the
height of the cabinet: the lower con-
tact edge X of the installation aids
must be at the same height as the
upper edge of the cabinet door to be
fitted ( symbol).