Miele KFN 37232 iD Operating And Installation Instructions page 46

Frequently asked questions
Messages in the display
Message
 is lit up in the display
and the appliance can-
not be used.
The alarm symbol 
and the temperature
display are flashing.
The  symbol lights up
in the display, the appli-
ance does not get cold,
although the controls
and the interior lighting
are working.
"F0 to F9" appears in
the display.
46
Possible cause and solution
The safety lock has been activated.
 Turn off the safety lock (see "Selecting settings -
Switching the safety lock on/off").
The temperature in the appliance is too warm.
For instance, this could be due to:
– the door being opened too frequently,
– a large quantity of fresh food has been placed in
the freezer at once without turning on the Super-
Freeze function.
– a lengthy interruption to the power supply.
 Rectify the cause of the alarm.
The alarm will stop and the alarm symbol  will go
out when the temperature reaches the correct level
again.
 Depending on the temperature displayed, you
should check the condition of food in the freezer. If
it has defrosted or started to defrost, check that it
is still safe to use and, if so, use it as soon as pos-
sible. Defrosted food may only be re-frozen after it
has been cooked.
Demo mode is switched on. This allows the appliance
to be presented in the showroom without the cooling
system being switched on. Do not activate this setting
for domestic use.
 Contact Miele Technical Service for information on
deactivating Demo mode.
There is a fault.
 Contact Miele Technical Service.