Building in the appliance
Remove cover .
Attach securing plate loosely with
screws to the top left of the appli-
ance. Leave the screws loose so the
plate can still be moved.
Push contact component onto se-
curing bracket .
Fix securing bracket loosely with
screws at the bottom of the appli-
ance. Leave the screws loose so the
bracket can still be moved.
68
Carefully remove the protective foil
from profile strip .
Stick profile strip flush onto the
front side of the appliance on which
the door will open.
1. To do this, place the profile strip on
the bottom edge of the securing
bracket.
2. Stick it down lengthways.