Table 5.1 Wbs24 Led Status And Meaning Of The Wbs24; Table 5.2 Status Of Wbs24 Ld1, Ld2 Leds - Samsung OfficeServ 500 Service Manual

CHAPTER 5. Maintenance
LED Name
PWR
WLAN
LAN
WLI
LD1
LD2
The number of B channels
being communicated
0
One
Two
Three
Four
1.1.1 Booting Failure
When the WBS24 fails to boot up, it means that the flash memory with the program
is not functioning. All of the 5 LEDs, except the PWR, blink periodically at the same
time to inform the fault status. The flash memory might be broken when the process
of the WBS24 upgrade is interrupted, and the fault status can be removed using 'the
upgrade using the network booting' method.
Page 5-2

Table 5.1 WBS24 LED Status and Meaning of the WBS24

Function
Status of Power Supply
Operating status of
wireless LAN
Operation status of
LAN
Connection status with
the 8WLI
Indicating the B
channel in use
Indicating the B
channel in use

Table 5.2 Status of WBS24 LD1, LD2 LEDs

LED status of the LD1
Blue LED Off
Blue LED Blinking Periodically
Blue LED Off
Blue LED Off
Blue LED Off
OfficeServ 500 Wireless LAN Service Manual/Ed.00
Blue On
Normal power No power supply
supply
Normal operation No operation of
of wireless LAN wireless LAN
Normal operation No operation of
of LAN LAN
Normally Not connected
connected with with the 8WLI
the 8WLI card card
Refer to the table below
Blue Off Blue Blinking
Data being
received and
transmitted via
wireless LAN
Data being
received and
transmitted via
LAN
Data being
received and
transmitted via the
8WLI card and the
DASL line
LED status of the LD2
Blue LED Off
Blue LED Off
Blue LED Off
Blue LED Blinking Periodically
Blue LED Off
© SAMSUNG Electronics Co., Ltd.
-