CHAPTER 1.Overview
3.5.2 WIP-5000M Block Diagram
BPF
PA
IF/
MOD
WLAN(802.11b) Part
The WIP-5000M is largely divided into 3 parts as below :
Wireless LAN Part
The wireless method used for the WIP-5000M is the IEEE802.11b Wireless LAN
specification at the 2.4GHzbandwith.
Also, the major components of wireless LAN are the Prism2.5 of Intersil, and are
composed of 4 components, such as ISL3984(PA), HFA3783(IF I/Q MOD. DEMOD.),
ISL3685, and MAC/BBP ISL3873B.
CPU, VoIP (SIP) Part
The CPU used for the WIP-5000M is a combined type that the RISC and DSP
functions are combined into one processor. That is, there is no need for a separate
DSP when processing voice for the Voice over WLAN. Also, the internal SRAM
allows the program performance possible without a separate external memory.
The major functions for the main processor are summarized as the wireless LAN,
control of other major components, processing of voice codecs, and echo removal.
The user interface part
The user interface part can provide various and convenient functions using graphic
LCDs and navigation key.
Page 1-18
Flash MEM
RF/IF
Conv
PCMCIA
BBP
CPLD
MAC
F/ROM
CPU, VoIP(SIP) Part
Figure 1.5 Block Diagram of WIP-5000M
OfficeServ 500 Wireless LAN Service Manual/Ed.00
CODEC
MPU
Netergy
© SAMSUNG Electronics Co., Ltd.
Receiver
Head
Set
MIC
Graphic LCD
Key-pad
Charging
Battery
Cradle
Vibrator
User Interface Part