Upgrading The 8Wli S/W; Connecting The Console Terminal To The 8Wli Card - Samsung OfficeServ 500 Service Manual

CHAPTER 5. Maintenance
3

Upgrading the 8WLI S/W

3.1

Connecting the Console Terminal to the 8WLI Card

1) In order to upgrade the 8WLI card software, either PC with the terminal
emulation on, such as a console terminal, or an ASCII terminal like VT-100 and
VT-220 types is used. When connecting the console terminal to the 8WLI card,
the console cable with 9-pin RS-232C connector as shown below is used.
2) Connect one end of the console to the RS-232C connector of the 8WLI card, and
connect the other end to the serial port of the console terminal(PC).
Page 5-18
Figure 5.17 Connecting Cable of the Console Terminal
Console terminal
Console cable
Figure 5.18 Connecting the Console Terminal to the 8WLI Card
OfficeServ 500 Wireless LAN Service Manual/Ed.00
RS-232C connector
© SAMSUNG Electronics Co., Ltd.