Start-Up - Lang S13827B Service Manual

1) Verify connections at plug and terminal block
2) Incoming Volt -
3) Amp draw
4) Verify actual oven temperature at 350 °F
Note: Install thermocouple wire in center of oven and set Top 3-heat switch for HI
and the Bottom 3-heat switch for LOW and let oven cycle for a minimum of three
times.
Model #_______
Store #___________
Contact_______________
Store Phone #___________ Service Company Phone #______________
Address_____________________
______________________
______________________
3827 Baking / Roasting Oven
Single Phase L1-L2______
Three Phase L1-L2______ L2-L3______ L3-L1______
L1______
L2______
L3______
Date_______ Serial #________
Tech Name___________________
Company _________________________
7
START-UPS
________ °F.