Table of Contents
Advertisement
WLAN module
Description
Intel Dual Band wireless-AC 7265 802.11 AC, 2x2, WiFi + Bluetooth 4.2 Combo Adapter (non-vPro)
IMPORTANT:
and replacement.
Before removing the WLAN module, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the base enclosure (see
5.
Disconnect the cable from the battery.
Remove the WLAN module:
1.
Carefully disconnect the 2 antenna cables from the module (1).
2.
Remove the Phillips M2.0x2.5 screw (2), and then remove the WLAN module (3).
Reverse this procedure to install the WLAN module.
Make special note of each screw and screw lock size and location during removal
Base enclosure on page
32).
Component replacement procedures
Spare part number
793840-005
43
Hide quick links:
Advertisement
Table of Contents
