When replacing the system board, be sure to remove the following components (as applicable) from the
defective system board and install on the replacement system board:
Solid-state drive (see
●
●
Memory modules (see
●
WLAN module (see
●
Heat sink for discrete graphics (see
PCH heat sink (see
●
Remove the system board:
1.
Disconnect the following zero-insertion force (ZIF) connectors from the system board:
●
Wireless antenna cable (1)
●
Speaker cable (2)
●
Keyboard cable (3)
●
Display cable (4)
USB board cable (5)
●
●
TouchPad cable (6)
●
Power button board cable (7)
54
Chapter 5 Removal and replacement procedures for authorized service provider parts
Solid-state drive (M.2) on page
Memory on page
40).
WLAN module on page
43).
Heat sink on page
PCH heat sink on page
45).
39).
44).