Power Requirements; Network Requirements; Film; Film Types - Kodak DRYVIEW 5800 User Manual

Specifications

Power Requirements

Network Requirements

Film

Film Types

Film Sizes

Film Storage

5-4
The Imager power supply has an auto-sensing and auto-switching feature for
both voltage and frequency. The current draw is 10 A at 120 V AC, and the
power consumption is a maximum of 1275 W.
One of the following single-phase, 15 A power sources, with grounding,
must be provided within 2.5 m (8 ft.) of the Imager.
Area
North America
Europe
China
The wire must be insulation-rated for 600 V. A dedicated line is
recommended.
The Imager receives digital images from medical imaging devices
(modalities) over a 10Base-T or 100Base-T ETHERNET Network. A single
CAT 5 UTP cable is provided in the accessories package for the Imager; 2
m (6.5 ft.).
Prior to installation you must order and have on hand DRYVIEW Laser
Imaging Film. Contact your sales representative if you have questions.
The Imager accommodates the following film types:
•
KODAK DRYVIEW DVB Laser Imaging Film
•
KODAK DRYVIEW DVC Laser Imaging Film
•
KODAK DRYVIEW DVB+ Laser Imaging Film
•
KODAK DRYVIEW DVB+ Premium Laser Imaging Film
NOTE:
Not all film types are available in every country.
The Imager accommodates the following film sizes:
•
20 x 25 cm (8 x 10 in.)
•
25 x 30 cm (10 x 12 in.)
•
28 x 35 cm (11 x 14 in.)
•
35 x 35 cm (14 x 14 in.)
•
35 x 43 cm (14 x 17 in.)
Film must be stored at 5 - 25° C (41 - 77° F) and 85% RH or less.
2G0733
Power
120 V AC +6% to -10%, 60 Hz ±3Hz
240 V AC ±10%, 50 Hz ±3Hz
250 V AC ±10%, 50/60 Hz ±3Hz
January 14, 2008