3
Troubleshooting
Error and Alarm Indications
DICOM Printer Status Messages
January 14, 2008
The Imager can detect errors and other conditions that require operator
action. These errors or abnormal conditions are reported on the display
screen and on the Web Portal in the form of condition codes and
messages.
In response to a DICOM printer N-GET status request from a modality,
a printer status message and a printer status info message are returned to
the requesting SCU. Every error has an associated printer status info
message. If more than one error exists when a printer N-GET request is
received, a status message is sent in response according to an
established priority. The following table shows the DICOM printer
status and printer status info.
Table 3-1: DICOM Printer Status Messages
Printer
Printer Status Info
Status
FAILURE
ELEC DOWN
PRINTER DOWN
PROC DOWN
Printer Status
WARNING
2G0733
Printer Status Info
BAD SUPPLY MGZ
CALIBRATION ERR
CHECK PRINTER
COVER OPEN
EMPTY MEDIASZ
MEDIATP
FILM JAM
FILM TRANS ERR
PRINTER BUSY
PROC INIT
PRINTER INIT
PRINTER OFFLINE
3-1