Sending And Receiving A Fax; Fax Mode Screen - Ricoh BBP-PRSP213NW1 Manual

6. Sending and Receiving a Fax

Fax Mode Screen

MF
This section provides information about the screen in fax mode.
By default, the display shows the copier screen when the machine is turned on.
If the copy or scanner screen is shown on the display, press the [Facsimile] key on the control panel to
switch to the fax screen.
Standby mode screen
1. Current status or messages
Displays the current status or messages.
2. Current settings
Displays the current density and resolution settings.
3. Current date and time
Shows the current date and time.
• The machine's default mode at power on can be specified in the [Function Priority] setting under
[Admin. Tools]. For [Function Priority], see page 159 "Administrator Settings".
• The display format for time and date can be specified in [Set Date/Time] under [Admin. Tools]. For
setting the date and time, see page 102 "Setting the Date and Time".
opal-p2_mf2_com_user_guide_00142105_eng.xml
DCT859
101
Draft 2014/01/07