Table of Contents
Advertisement
8. Configuring the Machine Using Utilities
Item
Date Format
Set Time
Item
Time Format
Time (AM/PM)
hour (0-23)
hour (1-12)
min. (0-59)
Energy Saver Mode Tab
MF
Energy Saver Mode
Item
Energy Saver Mode 1
Energy Saver Mode 2
196
Select the date format from [MM/DD/YYYY], [DD/MM/YYYY], or
[YYYY/MM/DD].
Select 24- or 12-hour time format.
Select [AM] or [PM] if 12-hour time format is selected.
Enter the current hour if 24-hour time format is selected (0-23).
Enter the current hour if 12-hour time format is selected (1-12).
Enter the current minute (0-59).
Select [Active] to set the machine to enter Energy Saver mode 1 if the
machine has been idle for about 30 seconds.
It takes less time to recover from Energy Saver mode 1 than from power-off
state or Energy Saver mode 2, but power consumption is higher in Energy
Saver mode 1 than in Energy Saver mode 2.
Select [Active] to set the machine to enter Energy Saver mode 2 after the
period of time specified for [Waiting Time (1 min. - 240 min.)] is passed (1
to 240 minutes).
The machine consumes less power in Energy Saver mode 2 than in Energy
Saver mode 1, but it takes longer to recover from Energy Saver mode 2
than from Energy Saver mode 1.
Description
Description
Description
opal-p2_mf2_com_user_guide_00142140_eng.xml
Draft 2014/01/07
Advertisement
Table of Contents
