Avaya WLAN 8100 Series Troubleshooting Manual page 52

Troubleshooting WLAN operations
Procedure
1. Log into the controller.
2. Press CTRL + Y on the keyboard to enter the console menu.
3. Select Command Line Interface from the menu.
4. Type the enable command to enter Privileged mode.
5. Use the command show wireless to view the overall status of the wireless
6. Use the command show wireless domain ap database to view information
7. Use the command show wireless domain ap discovered to view any
8. Use the command show wireless ap status to display all of the access points
9. Use the command show wireless ap status detail command to display
10. Use the command show wireless controller status to determine the
52 Avaya WLAN 8100 Troubleshooting Guide
system.
about the access points configured for the wireless domain.
access points that have been discovered. Access points listed here need to be
added to main access point database to be used by the domain.
that are part of the wireless domain and under which controller it falls.
detailed information about each AP that is part of the wireless domain.
current status of the wireless controller. This command should indicate the controller
is either the Active or Backup MDC.
Comments? infodev@avaya.com
August 2011