Procedure
1. Enter Global Configuration mode.
2. Enter the no logging remote level command to remove the severity level of
Setting the default remote logging level
About this task
Use this procedure to set the remote logging level to default.
Procedure
1. Enter Global Configuration mode.
2. Enter the default logging remote level command to sets the severity level
Configuring port mirroring
About this task
Port mirroring can be configured with the CLI commands detailed in this section.
Navigation
•
Displaying the port-mirroring configuration
•
Configure port-mirroring
•
Disabling port-mirroring
Displaying the port-mirroring configuration
About this task
Use this procedure to display the existing port-mirroring configuration.
Procedure
1. Enter Privileged Executive mode.
2. Enter the show port-mirroring command to display the port-mirroring
Configure port-mirroring
About this task
Use this procedure to set the port-mirroring configuration
Avaya WLAN 8100 Troubleshooting Guide
the logs that will be sent to the server. The level is set to none.
of the logs sent to the remote server. The default level is none.
on page 35
on page 37
configuration.
Configuring diagnostics and graphing
on page 35
August 2011
35