Timer-Controlled Operation; Timer-Controlled Off Type; Timer-Controlled Manual Type; Timer-Controlled Automatic Type - Vemer Crono.X User Manual

2) Press or to select SUMMER-AIR CONDITIONING
3) Press to confi rm or else wait for 45 seconds

TIMER-CONTROLLED OPERATION

This very useful function makes it possible to temporarily change, for
a user-defi nable term, the normal functioning of the programmable
thermostat.
The timing can be selected in hours (max 99) or days (max 99) and is indicated by
the symbol .
There are three types of timer-controlled operation:

TIMER-CONTROLLED OFF TYPE

The starting operating mode is OFF and it is kept for a determined term (hours
or days), after which the device resumes the previous operating mode (Manual or
Automatic).
This type of timer-controlled operation can be used during vacations, so
that automatic mode is discontinued.

TIMER-CONTROLLED MANUAL TYPE

The Starting operating mode is MANUAL and it is kept for a determined term (hours
or days), after which the device resumes Automatic operation.
This type of timer-controlled operation can be used to keep for a few hours (or
days) a temperature different from the Automatic set-point.
For example, this can be selected on a very chilly winter evening, to raise the
temperature for a couple of hours using the manual operation mode. Then the user
will not need to remember to set the CRONO.X back to automatic before going to
bed.

TIMER-CONTROLLED AUTOMATIC TYPE

The Starting operating mode is AUTOMATIC and it is kept for a determined term
(hours and days), after which the device switches back to the OFF mode.
This is used to switch the CRONO.X off for a certain time or a day when
nobody is going to be in.
- 49 -
User Manual - CRONO.X programmable thermostat